I-Bent series (I-Bent-L, I-Bent-H, I-Bent Base)
I-Bent series includes the following products: I-Bent Base, I-Bent-L and I-Bent-H. I-Bent Base is a polymer-free basis for drilling fluids, I-Bent-L and I-Bent-H are polymerized mixtures.
All grades of the I-Bent series are compatible with traditionally used control reagents and polymers, while the use of I-Bent-L and I-Bent-H in most cases does not require additional treatment of the drilling fluid. The I-Bent series is manufactured in accordance with TU 08.12.22-011-00136716-2020 at KZPM JSC.
| Indicators | Measurement Unit | Values for I-Bent series | ||
| I-Bent-L | I-Bent-H | I-Bent-Base | ||
| Bentonite powder characteristics | ||||
| Moisture content | % | 11-12,5 | ||
| Bentonite suspension characteristics | ||||
| Powder concentration in the slurry | % | 3 | ||
| Fann viscosimeter values (at 600 rpm) | degrees | 25-35 | 45-55 | 20-25 |
| Fann viscosimeter values (at 3 rpm) | degrees | 10-18 | 12-20 | 12-20 |
| Specific viscosity (Marsh funnel), min | c | 40-60 | 65-80 | 30-45 |
| Wet residue on sieve with mesh No. 0071, max | % | 1 | ||
All products are packed in 3-layered paper bags of 25 kg with a waterproof layer or in large-size containers (big bag type).
Products shipment:
- containers and gondola cars from Ilskaya station;
- EXW, including from warehouse in Moscow.